MT-80 LED
This configuration can easily perform at its full potential, delivering more than 24.520 lumens. 80 pieces of high power LEDs and advanced optics have proven to comply with lighting demands for highways, expressways and traffic heavy conflict areas. It's aerodynamic shape and low air resistance make it a safe choice for high pole installation in strong wind zones. High IP66 and IK09 rating makes this luminaire practically indestructible. Pairing all this along with a modular design and you get a luminaire with a very high service life.
Modern design with an emphasis on optimizing aluminum die-casting. The luminaire edges are rounded for better color durability. All screws have been cleverly positioned outside the IP66 area.
| System flux: | 16.223 lm - 24.522 lm |
| System power: | 111 W - 165 W |
| CCT: | 2700 K, 3000 K, 4000 K |
| CRI: | ≥70, ≥80 |
| Classification: | IEC protection class I/II, IP66, IK10 |
| Surge protection: | 10 kV ((L/N-ground), 6 kV (L-N)), 15kV, 20kV |
| Smart lighting: | Virtual midnight, AstroDIM, StepDIM, DALI |
| On request: | 4-pin socket (ZHAGA book 18), CLO |
| Overtime performance: | L80B10 100.000 hours at Ta=25°C |
| Certification: | CE, ENEC PLUS |
| Mounting device: | For pole spigot from ⲫ42 to ⲫ60 mm |
| Fixation type: | post top / side entry |
| Tilt angle: | 0°/ ±5/ ±10 /±15 |
| Connecting: | IP66 fast connector (2/3 or 5 pole) |
| Net weight: | 9,35 kg |
| Pre-wiring: | preinstalled with fast connector - Default: 3-pin fast connector IP66 on 0,2m 3G1 cable - Optional: custom cable length with or without fast connector |
| Housing material: | High pressure die-cast aluminum |
| Finish: | Polyester powder-coated paint in RAL 9007 |
| Optic material: | PMMA High transparent |
| Optical cover: | OPTIWHITE 5 mm tempered glass |
| Cable gland: | stainless steel with pressure equalization membrane |
| Fixation bolts: | stainless steel grade A4 |
CO
Beam with excellent longitudinal luminance uniformity fulfilling EN13201 M-class requirements where road width is equal to or less the pole height.
FF
Narrow forward throw beam for area lighting. Excellent for lighting stadiums and airports from high masts.
H3
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is ≥ the pole height. Usually to illuminate up to three lanes in front of the pole.
H4
Excellent longitudinal luminance uniformity for EN13201 M-class where road width is wider than the pole height. Usually to illuminate up to four lanes in front of the pole.
ND
IESNA Type II (medium) beam applicable for European P-class standard pedestrian lighting and M-class roads.
WD
Universal road lighting beam with excellent mixed illuminance and luminance uniformity. Typically IESNA Type III (medium).
| Attachment | Size |
|---|---|
 Catalogue MT-80 LED | 7.22 MB |
